Mystery Location of Part T500-J

For those wanting to keep their bike the way the factory made them.

Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan

Post Reply
Syd
To the on ramp
Posts: 215
Joined: Tue Aug 02, 2011 8:25 pm
Country: New Zealand
Suzuki 2-Strokes: 72 T500J, 72 Kaw H1-B, 71 CB750 K1, 67 A7SS

Mystery Location of Part T500-J

Post by Syd »

Can anyone advise where Item 37 = P/N 09403-00045 Clamp is located? I assume It is used to hold and cable or wire in place on the frame some where. If anyone has a photo of this in place, that would be great.

See; http://www.ozebook.com/compendium/T500parts/image30.htm" onclick="window.open(this.href);return false;
Syd
To the on ramp
Posts: 215
Joined: Tue Aug 02, 2011 8:25 pm
Country: New Zealand
Suzuki 2-Strokes: 72 T500J, 72 Kaw H1-B, 71 CB750 K1, 67 A7SS

Re: Mystery Location of Part T500-J

Post by Syd »

Any ideas on where this part goes??
User avatar
oldjapanesebikes
Moto GP
Posts: 3229
Joined: Sat Feb 07, 2009 12:43 am
Country: Canada
Suzuki 2-Strokes: GT750(Jx3,L,M,A,B),T500
Location: Ontario
Contact:

Re: Mystery Location of Part T500-J

Post by oldjapanesebikes »

That's just one of the vinyl/plastic covered soft bendable metal wire clamps ? Normally on the early '70's twins they were found around the area of the rectifier just to catch the bundle of wires in that area and make it tidier. 8)
Ian

If at first you don't succeed, just get a bigger hammer !
Syd
To the on ramp
Posts: 215
Joined: Tue Aug 02, 2011 8:25 pm
Country: New Zealand
Suzuki 2-Strokes: 72 T500J, 72 Kaw H1-B, 71 CB750 K1, 67 A7SS

Re: Mystery Location of Part T500-J

Post by Syd »

Thanks for that - Yes you are correct about the material used for this. It is long at around +140mm and I was wondering where this would go - I'll check this out.
Post Reply