Bolts - T500
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
- To the on ramp
- Posts: 215
- Joined: Tue Aug 02, 2011 8:25 pm
- Country: New Zealand
- Suzuki 2-Strokes: 72 T500J, 72 Kaw H1-B, 71 CB750 K1, 67 A7SS
Bolts - T500
I would appreciate to know if all of the metric bolts sizes used on a T500 are 1.25 pitch?
- H2RICK
- AMA Superbike
- Posts: 1659
- Joined: Sun Oct 19, 2008 11:07 am
- Country: CANADA
- Suzuki 2-Strokes: GT550A, GSF1200SK6 currently
- Location: Cowtown aka Calgary, Canada
Re: Bolts - T500
Nope, Syd. Suzuki follows ISO convention/specs for "coarse" threads as below:
6mm x 1.0
8mm x 1.25
10mm x 1.5
12mm x 1.75
14mm x 2.0
There are places on most Japanese bikes where they sometimes use an ISO "fine" thread e.g.
footpeg mount bolts, engine mount bolts, swingarm pivot bolt, etc:
6mm is always 1.0......although the odd time I have run into a 6mm x 0.8 in special applications
8mm x 1.0
10mm x 1.25
12mm x 1.25
14mm x 1.5
Post back if you need larger sizes than shown above.
6mm x 1.0
8mm x 1.25
10mm x 1.5
12mm x 1.75
14mm x 2.0
There are places on most Japanese bikes where they sometimes use an ISO "fine" thread e.g.
footpeg mount bolts, engine mount bolts, swingarm pivot bolt, etc:
6mm is always 1.0......although the odd time I have run into a 6mm x 0.8 in special applications
8mm x 1.0
10mm x 1.25
12mm x 1.25
14mm x 1.5
Post back if you need larger sizes than shown above.
GT550A Mint & Original
H2A Semi-Hot Rod Built From A Basket Case
KZ650C2 Mint & Original...mostly
GSF1200SK6 Bandit...My LD Ride
Additional H2 projects In Boxes.....
MBD Sufferer
H2A Semi-Hot Rod Built From A Basket Case
KZ650C2 Mint & Original...mostly
GSF1200SK6 Bandit...My LD Ride
Additional H2 projects In Boxes.....
MBD Sufferer
-
- To the on ramp
- Posts: 215
- Joined: Tue Aug 02, 2011 8:25 pm
- Country: New Zealand
- Suzuki 2-Strokes: 72 T500J, 72 Kaw H1-B, 71 CB750 K1, 67 A7SS
Re: Bolts - T500
Thanks for that - spot on...