Suzuki 2 Strokes

Hi all, I'm new to this forum stuff so be nice lol. I have a 75 gt750 and I'm wondering if anyone here has purchased the petcock off Amazon and if so is it any good, I've struggled to find a kit, especially here in Australia.

Johnny

Welcome to the forum.

Don’t know anything about those petcocks. Might be worth a try.

Another option is to do a manual conversion to your Suzuki petcock.
The forum has some info about the conversion. We can provide the links if you are interested.

Thanks for the advice,links would be greatly appreciated.

Link for the conversion I did on an early GT-triple petcock that has 3 outlets.
You should check to make sure the passages are the same on your later petcock.

I used some red plastic model paint to mark the off position.

http://www.suzuki2strokes.com/forum/vie ... =9&t=14743

The passages are different on the later models, from early models. Early style has 4 hole valve, later style has 5 hole valve.
On the later models you plug the center hole in valve, you must also connect the two passages in the valve handle by removing material, making a reverse J.

Thanks guys, appreciate it.

I purchased a new one for my Gt750M from Mick Hone Motorcycles in Melbourne.