Gaskets - Tired old concept...
Posted: Mon Jul 03, 2017 12:51 pm
Pretty tough to get new gaskets for my 1969 T-20.
The existing gasket between the block and the head are somewhat intact...
Can I reinforce them with a Gasket sealer?
See reference to these products.
http://www.rrrtoolsolutions.com/article ... explained/
I purchased Permatex Motoseal Powersport GasketMaker today... but am unsure if it's the right stuff...
Is it proper/appropriate installation to apply a thin coat of this(or whatever the instructions say... to the existing gasket and just reset the parts together? Taking the gasket all the way off will be extremely difficult.
Thanks
The existing gasket between the block and the head are somewhat intact...
Can I reinforce them with a Gasket sealer?
See reference to these products.
http://www.rrrtoolsolutions.com/article ... explained/
I purchased Permatex Motoseal Powersport GasketMaker today... but am unsure if it's the right stuff...
Is it proper/appropriate installation to apply a thin coat of this(or whatever the instructions say... to the existing gasket and just reset the parts together? Taking the gasket all the way off will be extremely difficult.
Thanks