I'm looking to get a set of Excel rims for my T250. Excel has two different ones listed for different drill angles for the holes. Has anyone done this before? I'ts an 18'' wheel, and I imagine similar to T500's and such.
Looking to go 18x1.85 in the rear and 18x2.15 in the rear. Laced to stock hubs.
T250 Alum Rims
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
- On the street
- Posts: 33
- Joined: Mon Jul 02, 2012 5:20 pm
- Country: Canada
- Suzuki 2-Strokes: T250, CB200
-
- On the street
- Posts: 33
- Joined: Mon Jul 02, 2012 5:20 pm
- Country: Canada
- Suzuki 2-Strokes: T250, CB200
Re: T250 Alum Rims
I've found my answer.
If anyone needs the infor for the future; KTM application Excel or Moose wheels will work. Moose makes 18x2.15 and 18x2.5, Excel makes 18x1.85 and 18x2.15.
Part numbers for drum front and rear 18'' in silver for Excel is
fds406
fes422
If anyone needs the infor for the future; KTM application Excel or Moose wheels will work. Moose makes 18x2.15 and 18x2.5, Excel makes 18x1.85 and 18x2.15.
Part numbers for drum front and rear 18'' in silver for Excel is
fds406
fes422