In my never ending quest to make an old bike New(er) again, Im looking to upgrade the front brakes ( to SV or Katana) rather than design and make a new caliper.
My Katana Rotors are 5 hole, and I noticed that GS1100/1000 rotors are 6 hole. Who can tell me if they will bolt up? It doesnt have to be a Suzuki rotor either.
Stock GT rotors are too thick to use with my Katana Calipers, let alone spacing the rotor out and an adapter plate to mount said caliper.
What rotors will bolt up to a GT 550/750 Hub
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
- On the main road
- Posts: 195
- Joined: Mon Sep 28, 2009 3:02 pm
- Location: Mid michigan
- Contact:
What rotors will bolt up to a GT 550/750 Hub
Novice rider,
Professional machinist,
Amature porn star.
Professional machinist,
Amature porn star.
-
- To the on ramp
- Posts: 342
- Joined: Tue Feb 17, 2009 1:20 am
- Country: Australia
- Suzuki 2-Strokes: T20 GT750L RE5A GSX1100S RG500G GSX-R1100N
- Location: QLD
- Suzsmokeyallan
- Moto GP
- Posts: 4326
- Joined: Fri Oct 24, 2008 9:11 am
- Location: Mostly Barbados, sometimes Florida and western Canada
- Contact:
This type bolts up directly as well and has the floating rivets and slots.
A slightly better design than the spiral slotted 'Y'spoked previous version.
http://cgi.ebay.com/ebaymotors/SUZUKI-G ... ccessories
A slightly better design than the spiral slotted 'Y'spoked previous version.
http://cgi.ebay.com/ebaymotors/SUZUKI-G ... ccessories
Two strokes, its just that simple.
69 Suz U70
69 Suz T500
72 Suz GT750 cafe
74 Suz TS250
74 Suz GTXVR project
75 Suz RE5
75 Suz GT750
76 Suz TS400
76 Suz GT750
81 Suz GSX1100
86 Suz RG500x2
88 Hon CR500
93 Hon CBR900RR
98 Suz GSF1200x3
15 Kaw Ninja H2
69 Suz U70
69 Suz T500
72 Suz GT750 cafe
74 Suz TS250
74 Suz GTXVR project
75 Suz RE5
75 Suz GT750
76 Suz TS400
76 Suz GT750
81 Suz GSX1100
86 Suz RG500x2
88 Hon CR500
93 Hon CBR900RR
98 Suz GSF1200x3
15 Kaw Ninja H2
- advant63
- To the on ramp
- Posts: 331
- Joined: Thu Oct 16, 2008 9:17 pm
- Country: canada
- Suzuki 2-Strokes: m12 or50 a100 s32-2 s32-2 t250 gt250 t500r
- Location: ontario
- Contact:
the caliper mounts have a different bolt centre so you'll have to keep the gt calipers.will work with either caliper - GT or GS/GSX
i have dual gt calipers and holy rotors on gs wheels using gs750 master and hoses.
it's acceptable for my purposes but i'm sure gs rotors would improve it alot.
m12 or50 k10 a100
s32-2 s32-2 t250r
gt250 t500r gt550a
twin cobras in baskets
s32-2 s32-2 t250r
gt250 t500r gt550a
twin cobras in baskets
- Willie
- Around the block
- Posts: 73
- Joined: Mon Sep 28, 2009 8:06 am
- Country: USA
- Suzuki 2-Strokes: GT750, GS1100E, GS1100G
- Location: Kingsport, TN
I'm in the process of mounting a pair of CBR600 rotors and SV650 calipers on my GT750. I just began taking measurements today and it "appears" that I'll have to make a 1mm thick sleeve for the hub and redrill the rotor mounting holes. The difference weight is impressive.
Willie
Willie
I've been everywhere from Bangor all the way to mighty Maine!
-
- Yeah Man, the Interstate
- Posts: 686
- Joined: Mon Nov 24, 2008 12:22 pm
- Location: Alexandria, La.
- Contact: