Page 1 of 1

T500

Posted: Fri Feb 02, 2018 2:08 am
by stevebee
Can anyone help Does a gt380 gt550 or gt750 triple tree fit a t500

Re: T500

Posted: Fri Feb 02, 2018 3:22 pm
by titan performance
You can certainly use the 750 stuff.....I wouldn't be suprised if the other two are the same, but I haven't had experience of those.

Re: T500

Posted: Fri Feb 02, 2018 5:19 pm
by jabcb
All Balls Racing has a lookup tool that shows what bearings you will need.
https://www.allballsracing.com/index.php/forkconversion

The steering stops that prevent you from turning too far are different on the T500 & GT-series bikes.
You’ll need to make new stops & weld them to the frame.

My T500 cafe build has a GT500 triple tree & will have GS-series fork tube assemblies.
The project is proceeding slowly & I plan on designing the stop in the next few weeks.

Re: T500

Posted: Sat Feb 03, 2018 2:10 am
by stevebee
thanks for your help.

Re: T500

Posted: Sat Feb 03, 2018 4:48 am
by jabcb
The T500 triple tree uses ball bearings on the steering stem. The tapered roller bearings listed in the All Balls guide are a little longer (in the axial direction). This lowers the bottom triple tree a few mm. Be sure to take this into account when positioning the new steering stop.