TC250 fork seal replacement help needed

Getting your chassis to handle your blazingly fast Suzuki powerplant.

Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan

Post Reply
aaronroberts
Still in the Driveway
Posts: 6
Joined: Sat Oct 29, 2022 11:25 am
Country: United States
Suzuki 2-Strokes: 1967 TC250

TC250 fork seal replacement help needed

Post by aaronroberts »

Hi all, haven't posted here for quite a while (I had to re-join), but I'm getting back to work on my 67 TC250. Can anyone lend some advice on fork seal replacement? I did a search but didn't find much for my bike. Any help or guidance is much appreciated. Thanks!
User avatar
jabcb
Moto GP
Posts: 4270
Joined: Mon Dec 13, 2010 4:32 pm
Country: USA
Suzuki 2-Strokes: 69 T350 thru 75 GT750
Location: southwestern Pennsylvania

Re: TC250 fork seal replacement help needed

Post by jabcb »

Printed manuals for your bike should be very helpful. The Suzuki manuals were pretty lame back then, so a Chilton’s service manual will also be useful. See eBay:
https://www.ebay.com/sch/i.html?_from=R ... l&_sacat=0
BAS (Bike Acquisition Syndrome) - too many bikes but have room for more

Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
aaronroberts
Still in the Driveway
Posts: 6
Joined: Sat Oct 29, 2022 11:25 am
Country: United States
Suzuki 2-Strokes: 1967 TC250

Re: TC250 fork seal replacement help needed

Post by aaronroberts »

Thanks for the reply! I'll look into that.
User avatar
tz375
Moto GP
Posts: 6206
Joined: Mon Nov 03, 2008 10:47 am
Location: Illinois

Re: TC250 fork seal replacement help needed

Post by tz375 »

And when you get the old fork seals out, measure the OD, ID and height (thickness) and search for seals of the same size.

If the seals are not to bad, you may even be able to read the dimensions off the seal. Their numbers are the dimensions.
aaronroberts
Still in the Driveway
Posts: 6
Joined: Sat Oct 29, 2022 11:25 am
Country: United States
Suzuki 2-Strokes: 1967 TC250

Re: TC250 fork seal replacement help needed

Post by aaronroberts »

Thanks, I'll try that.
User avatar
jabcb
Moto GP
Posts: 4270
Joined: Mon Dec 13, 2010 4:32 pm
Country: USA
Suzuki 2-Strokes: 69 T350 thru 75 GT750
Location: southwestern Pennsylvania

Re: TC250 fork seal replacement help needed

Post by jabcb »

The seals are likely the same as used in the T250 & T350.
Those seals are NLA from Suzuki but are available from the aftermarket. Also, new Suzuki seals will likely be available on eBay.

That’s one of the reasons I’m a big fan of getting the old Suzuki parts manuals. It’s the manual the dealers used back then to get parts when servicing these bikes.

Compare the parts number to the T250/T350 number. Then get seals for the T250/T350. Easy & simple once you have the old printed parts manual.
BAS (Bike Acquisition Syndrome) - too many bikes but have room for more

Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
aaronroberts
Still in the Driveway
Posts: 6
Joined: Sat Oct 29, 2022 11:25 am
Country: United States
Suzuki 2-Strokes: 1967 TC250

Re: TC250 fork seal replacement help needed

Post by aaronroberts »

Good advice, thank you!
Post Reply