T500 ball suck?

Everything you want to know about oil but were "afraid to ask"!

Moderators: diamondj, Suzsmokeyallan, oldjapanesebikes, H2RICK

Post Reply
RossB
On the main road
Posts: 138
Joined: Wed Jun 08, 2016 12:54 pm
Country: United States
Suzuki 2-Strokes: RD400 T500 Titan GT550

T500 ball suck?

Post by RossB »

Hey Gents
Still trying to figure out why my bike is blowing 2 stroke oil everywhere just dips down from the heads to manifold out the chambers,down the road when I'm on it,not bad at idle, new crank seals in and out. Just took pump apart looks good lines mint used new Kawi banjo valves. Check actuator arm really only works one way. Could the engine suck oil thru lines?! Ruined a brand new pair of Uggs on my last ride?
(Not)


Happy Easter!
RossB
On the main road
Posts: 138
Joined: Wed Jun 08, 2016 12:54 pm
Country: United States
Suzuki 2-Strokes: RD400 T500 Titan GT550

Re: T500 ball suck?

Post by RossB »

Well after taking everything apart, bleeding, put it all back together works perfect! Only thing I can think of is somehow the pump was all the way open maybe pinched it with bleed bolt? Not much to the pump. Thanks for the help!
rngdng
AMA Superbike
Posts: 1728
Joined: Tue Oct 14, 2008 6:47 pm
Location: Blythewood, SC, USA

Re: T500 ball suck?

Post by rngdng »

Glad it's better.
If you stroke it more than twice; you're playing with it.

Too many bikes, too much time, ENOUGH SPACE, FINALLY! Never enough money.........
Post Reply