Hey boys
Just getting engine together little confused my bike has two clutch rods one long that goes to clutch basket the other goes into the clutch seal then pushes against long one, manual shows one? It works
But what up!
Thanks
T500 clutch rods?
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
- On the main road
- Posts: 138
- Joined: Wed Jun 08, 2016 12:54 pm
- Country: United States
- Suzuki 2-Strokes: RD400 T500 Titan GT550
-
- To the on ramp
- Posts: 276
- Joined: Tue Jan 22, 2013 3:40 pm
- Country: Ontario, Canada
- Suzuki 2-Strokes: B100P,T200, 68,70,74 T500,GS650G DL1000
Re: T500 clutch rods?
Earlier engines had two clutch rods, not sure what year they went to one. The 68 Cobra also had two but different lengths than later versions.
68 B100P x2
68 T500 Cobra x3
69 T500
70 T500 x2
74 T500
76 GT500
76 GT185 x2
81 GS650G x2
04 DL1000
68 T500 Cobra x3
69 T500
70 T500 x2
74 T500
76 GT500
76 GT185 x2
81 GS650G x2
04 DL1000
-
- On the main road
- Posts: 138
- Joined: Wed Jun 08, 2016 12:54 pm
- Country: United States
- Suzuki 2-Strokes: RD400 T500 Titan GT550
Re: T500 clutch rods?
Thanks
Looked at manual again and it shows 2 rods same part number the old one was bent in a S shape?
Have a Happy!
Looked at manual again and it shows 2 rods same part number the old one was bent in a S shape?
Have a Happy!