Page 1 of 1

suzuki RV 75 oil pump

Posted: Tue May 24, 2016 3:00 am
by markybrisbane
Hi Guys,

I have recently picked up a 1972 suzuki RV 75 that has sat around for some years. Got most of the problems sorted then fresh fuel/oil and a carby clean and went for a ride. After a 10 minutes of so it stopped blowing smoke....... I found the banjo fitting feeding the oild pump was a bit clogged.

I have the pump set up with a head of oil and im running it with my battery drill, Im getting a very slow drip of oil out of the port for the mixer and seems nothing out of the port to supply the crank bearings.

Any idea how much oil i should be seeing ?

Should the crank and intake receive different amounts of oil ?

Any Dramas pulling these pumps apart ?




Thanks Mark