dip stick

Everything you want to know about oil but were "afraid to ask"!

Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan

Post Reply
elbert
On the main road
Posts: 132
Joined: Tue Oct 21, 2008 8:11 am
Location: Stavanger, Norway

dip stick

Post by elbert »

On the old board someone described how they made a dip stick for the transmission from an old oil plug. I want to make one myself but what is the recomended way of fixing the dip stick to the plug so that it won't come loose?
User avatar
tz375
Moto GP
Posts: 6204
Joined: Mon Nov 03, 2008 10:47 am
Location: Illinois

Post by tz375 »

The most efficient way is probably to drill a hole in the filler cap for the dipstick (steel or aluminum rod say 2.5 - 3.00 mm diameter.

push in the new dipstick and then cross dill with say a 1.0mm hole but not all teh way through. Push in a 1mm pin through the cap and through the rod and it should be 100% safe.
elbert
On the main road
Posts: 132
Joined: Tue Oct 21, 2008 8:11 am
Location: Stavanger, Norway

Post by elbert »

Crossdrilling sounds like a good idea, I was planning to use plastic since it would cause less damage if it loosens and gets into the transmission. But with crossdrilling I guess I should be safe anyway.
Gordon
"Which one is not like the others?"
Posts: 169
Joined: Sat Nov 22, 2008 3:50 pm

Post by Gordon »

Deleted
Last edited by Gordon on Tue Apr 14, 2009 6:30 am, edited 1 time in total.
elbert
On the main road
Posts: 132
Joined: Tue Oct 21, 2008 8:11 am
Location: Stavanger, Norway

Post by elbert »

Gordon,

That sounds like the super safe mode, and since I have a spare plug I think I'll go for that one. It won't take much extra room in my tool kit...
GT Tim
Yeah Man, the Interstate
Posts: 732
Joined: Tue Oct 14, 2008 9:41 pm

Post by GT Tim »

Now that's thinkin' with your dipstick, Jimmy... er Gordon!

http://www.youtube.com/watch?v=Mj5ms9PJDNY
Gordon
"Which one is not like the others?"
Posts: 169
Joined: Sat Nov 22, 2008 3:50 pm

Post by Gordon »

Deleted
Last edited by Gordon on Tue Apr 14, 2009 6:30 am, edited 1 time in total.
User avatar
frappy
On the main road
Posts: 111
Joined: Wed Oct 15, 2008 1:36 am
Country: USA
Suzuki 2-Strokes: T500M, T250-II, GT750J
Location: Scotts Valley, CA - USA

Post by frappy »

I wonder if a cap with integral dipstick from another bike would work?
'75 - T500M
'72 - GT750J
'70 - T250-II
rngdng
AMA Superbike
Posts: 1769
Joined: Tue Oct 14, 2008 6:47 pm
Location: Blythewood, SC, USA

Post by rngdng »

I made a dipstick from a plastic tie wrap, which was held by a cross-drilled pin. It worked.


Lane
If you stroke it more than twice; you're playing with it.

Too many bikes, too much time, ENOUGH SPACE, FINALLY! Never enough money.........
User avatar
frappy
On the main road
Posts: 111
Joined: Wed Oct 15, 2008 1:36 am
Country: USA
Suzuki 2-Strokes: T500M, T250-II, GT750J
Location: Scotts Valley, CA - USA

Post by frappy »

Sure would be nice if Dofin could post a picture of it :?
'75 - T500M
'72 - GT750J
'70 - T250-II
Post Reply