Different T500 reed valve conversion
Posted: Thu Nov 22, 2012 4:09 am
Saw this on the NAS board and thought I would cross post. Different take on converting a T500 to reeds with the reed block added to the crankcase rather than the cylinders:
http://2stroker.createforumhosting.com/ ... t6285.html
Not sure how you would keep the right cylinder carb from hitting the oil pump but an interesting idea anyway...
Jim
http://2stroker.createforumhosting.com/ ... t6285.html
Not sure how you would keep the right cylinder carb from hitting the oil pump but an interesting idea anyway...
Jim