3 into 1 pipe

diablo · Post by **diablo** » Fri Apr 20, 2012 11:55 pm

I could post some pics, I think it is the same pipe that omar sells if that is any better for you.

tz375 · Post by **tz375** » Sat Apr 21, 2012 8:13 am

I haven't seen any decent pictures of Omar's pipe either. The usual pic is 2" x 2" and doesn't show much. It would be interesting to see what it actually looks like. Thanks

diablo · Post by **diablo** » Sat Apr 21, 2012 12:42 pm

diablo · Post by **diablo** » Sat Apr 21, 2012 12:46 pm

i like it, they say it sounds like a ferrari

diablo · Post by **diablo** » Wed May 09, 2012 11:49 pm

could you tell me proper route for choke/clutch/throttle cable on the k model. i am seeing it in different places on different pics, thanks in advance.

Suzukidave · Post by **Suzukidave** » Thu May 10, 2012 12:03 am

diablo wrote:could you tell me proper route for choke/clutch/throttle cable on the k model. i am seeing it in different places on different pics, thanks in advance.

Info supplied on Ian's site http://www.oldjapanesebikes.com/fieldgu ... iring.html" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;

diablo · Post by **diablo** » Thu May 10, 2012 10:33 am

yes that is the first place i looked, could not see where the choke cable goes and mine don't seem to fit right. I gess i will have to measure it to make shure it is the right one.

tz375 · Post by **tz375** » Mon May 14, 2012 5:03 pm

Nice looking pipe. What is the baffle design - Is it a straight perforated tube or something more esoteric?

diablo · Post by **diablo** » Tue May 22, 2012 8:34 pm

yes, it is a straight perforated tube that fits into the end of the cone, lots of packing but still makes a bit of esoteric noise. I like it alot, don't have the power of 3 into 3 and it really works good on the k motor. Will get some pics up soon.
I have close to 100 miles on it working out the bugs, the float bowls seem to empty out at steady speeds above 60 mph. i set the float level at 27 mm as it shows in the diagram in the clymer book, do i have the floats set too low? shure don't want to hole a piston, did you ever have that problem?

diablo · Post by **diablo** » Wed May 23, 2012 5:27 pm

pics will post for me, what am i doing wrong now

diablo · Post by **diablo** » Wed May 23, 2012 5:29 pm

IMG_0986

jabcb · Post by **jabcb** » Wed May 23, 2012 7:08 pm

Instructions are here: viewtopic.php?f=1&t=3098

Make sure the files are in jpg, jpeg, or gif formats.
I generally make sure files are smaller than 250kb.

diablo · Post by **diablo** » Wed May 23, 2012 7:46 pm

sais the file is too big, it is under 2 mb, hmm

diablo · Post by **diablo** » Wed May 23, 2012 8:27 pm

diablo · Post by **diablo** » Wed May 23, 2012 8:29 pm

the patriot

3 into 1 pipe

Re: 3 into 1 pipe

Re: 3 into 1 pipe

Re: 3 into 1 pipe

Re: 3 into 1 pipe

Re: 3 into 1 pipe

Re: 3 into 1 pipe

Re: 3 into 1 pipe

Re: 3 into 1 pipe

Re: 3 into 1 pipe

Re: 3 into 1 pipe

Re: 3 into 1 pipe

Re: 3 into 1 pipe

Re: 3 into 1 pipe

Re: 3 into 1 pipe

Re: 3 into 1 pipe