Suzuki 2 Strokes

http://picasaweb.google.de/yogibear2204 ... eileMotor2#

here's several more pages of his work http://picasaweb.google.de/yogibear2204 ... ileMotor22# , http://picasaweb.google.de/yogibear2204 ... linderkopf#

I didn't know blocks of aluminum that big even existed!!!???

Kris

Kris , here is some aluminum blocks on ebay that would be good for reed boxes http://cgi.ebay.com/BILLET-6061-ALUMINU ... 286.c0.m14

Kris Bernstein wrote:I didn't know blocks of aluminum that big even existed!!!???

Kris

Those aren't that big, you should see the ones in the machine shop at my work. They have to drill holes in them and bolt lifting eyes in them to move them with a overhead crane.

Kris Bernstein wrote:I didn't know blocks of aluminum that big even existed!!!???

Kris

Kris , i wish i could find it again on the Kawasaki list but one of the guys posted pictures of a business he gets aluminum from that thats out west some where that had HUGE chunks like 10~14" thick and maybe 10' long and huge round bars .. i will see if i can find that post again .

That engine is going to be awesome. Owning a machine shop must be nice.



Lane

The machinest must have done the build for the fun of it as he turned around and sold the bike