76 750 needs some help

Getting your blazingly fast Suzuki powerplant to perform even better!

Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan

Post Reply
fredgarvin
Still in the Driveway
Posts: 7
Joined: Sun Nov 04, 2018 3:04 pm
Country: United States
Suzuki 2-Strokes: 72 ts 185 765 gt750

76 750 needs some help

Post by fredgarvin »

Greetings,
I have a 76 750 that has not been run since 1995 with 21k on it that needs some engine work ie. crank seals and possibly some mild porting. Every thing works: spins over, has spark etc. Can any one provide a one stop source that might be able to accomplish this? I am looking for engine work only. I will be restoring the remainder on my own.
Thanks for your input.
User avatar
jabcb
Moto GP
Posts: 4240
Joined: Mon Dec 13, 2010 4:32 pm
Country: USA
Suzuki 2-Strokes: 69 T350 thru 75 GT750
Location: southwestern Pennsylvania

Re: 76 750 needs some help

Post by jabcb »

Would help to know what part of the country you are in.
BAS (Bike Acquisition Syndrome) - too many bikes but have room for more

Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
fredgarvin
Still in the Driveway
Posts: 7
Joined: Sun Nov 04, 2018 3:04 pm
Country: United States
Suzuki 2-Strokes: 72 ts 185 765 gt750

Re: 76 750 needs some help

Post by fredgarvin »

Western slope of Colorado, (7200 ft. msl) hence, the need for some mild porting and the correct carb jetting. I made contact with Jemco and digested a lot of info from this forum, so I see the need for shipping. I would like to get the logistics worked out to limit the complexity with a project such as this.
Hope this helps.
Post Reply