SRIS tubing cylinder placement

Getting your blazingly fast Suzuki powerplant to perform even better!

Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan

Post Reply
GTrida4life
Around the block
Posts: 52
Joined: Thu Aug 02, 2018 9:15 am
Country: Tennessee
Suzuki 2-Strokes: 73 GT750, 75 GT750, HD Road Glide
Location: Clarksville

SRIS tubing cylinder placement

Post by GTrida4life »

I am trying to properly locate the SRIS plumbing on my GT750. In the manual it shows C, R and L spigots close to the top of the cylinder just below the exhaust. On my bike cylinder the L and R spigots are present however the C spigot I can't seem to locate. Has anyone else had this issue or am I looking in the wrong place for this model? Please advise...thanks. :up:
User avatar
Evans Ward
To the on ramp
Posts: 326
Joined: Mon Oct 24, 2016 12:35 pm
Country: USA
Suzuki 2-Strokes: 76 GT750, 72 H2 750, 84 RZ350
Location: Macon, GA. USA

Re: SRIS tubing cylinder placement

Post by Evans Ward »

IMG_6707.JPG
You do not have the required permissions to view the files attached to this post.
1976 Suzuki GT750 (Maui Blue), 1972 Kawasaki H2 750 Mach IV (Candytone Blue), 1984 Yamaha RZ350 (KRR- Yellow/ Black).
Indy650
Around the block
Posts: 84
Joined: Tue Jul 03, 2018 4:32 pm
Country: Usa
Suzuki 2-Strokes: '74 GT250

Re: SRIS tubing cylinder placement

Post by Indy650 »

heres a pic of the hard to find one. its on the intake side under the intake boot.
Image
Post Reply