gasket thickness.......

Getting your blazingly fast Suzuki powerplant to perform even better!

Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan

Post Reply
User avatar
garry55
Yeah Man, the Interstate
Posts: 629
Joined: Wed Jan 01, 2014 2:04 pm
Country: UK
Suzuki 2-Strokes: GT750 hybrids (x2) RGV500

gasket thickness.......

Post by garry55 »

anyone know what the combined thickness of a GT750 standard head and base gasket is? I need to make a sacrificial gasket to accurately measure the height of an assembled (empty) motor to enable the front upper mounts on my hybrid to be fabricated and fitted.

Ta !
Garry


I'm addicted to brake fluid, but I know I can stop anytime.
rngdng
AMA Superbike
Posts: 1769
Joined: Tue Oct 14, 2008 6:47 pm
Location: Blythewood, SC, USA

Re: gasket thickness.......

Post by rngdng »

The late-model GT750 head gasket is .5mm. Base is also .5mm. Earlier than MAB used .75mm head gasket. All of this assuming my memory hasn't lapsed again....


Lane
If you stroke it more than twice; you're playing with it.

Too many bikes, too much time, ENOUGH SPACE, FINALLY! Never enough money.........
Post Reply