anyone know what the combined thickness of a GT750 standard head and base gasket is? I need to make a sacrificial gasket to accurately measure the height of an assembled (empty) motor to enable the front upper mounts on my hybrid to be fabricated and fitted.
Ta !
gasket thickness.......
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
- garry55
- Yeah Man, the Interstate
- Posts: 629
- Joined: Wed Jan 01, 2014 2:04 pm
- Country: UK
- Suzuki 2-Strokes: GT750 hybrids (x2) RGV500
gasket thickness.......
Garry
I'm addicted to brake fluid, but I know I can stop anytime.
I'm addicted to brake fluid, but I know I can stop anytime.
-
- AMA Superbike
- Posts: 1769
- Joined: Tue Oct 14, 2008 6:47 pm
- Location: Blythewood, SC, USA
Re: gasket thickness.......
The late-model GT750 head gasket is .5mm. Base is also .5mm. Earlier than MAB used .75mm head gasket. All of this assuming my memory hasn't lapsed again....
Lane
Lane
If you stroke it more than twice; you're playing with it.
Too many bikes, too much time, ENOUGH SPACE, FINALLY! Never enough money.........
Too many bikes, too much time, ENOUGH SPACE, FINALLY! Never enough money.........