The road to over 100hp- easy enough with a GT 750?
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
Alan H
- Moto GP
- Posts: 3258
- Joined: Thu Feb 16, 2012 11:50 am
- Country: England
- Suzuki 2-Strokes: 4 x GT550s - J, M, A, B.
- Location: The Republic of South Yorkshire
Re: The road to over 100hp- easy enough with a GT 750?
A magic wand?
Think of how stupid the average person is, then realise that half of them are more stupid than that.
-
Stephendownunder
- Still in the Driveway
- Posts: 9
- Joined: Mon May 06, 2013 10:52 pm
- Country: Australia
- Suzuki 2-Strokes: GT750B
Re: The road to over 100hp- easy enough with a GT 750?
Ok….200hp just to far for 750cc, but to be competitive with modern equipment you need 150hp. 50hp per 250cc doesn’t seem impossible. Surely it has been done or near as. Having said that I’ve only managed 119hp ! But that has very small GEM reeds…..
Finny
Finny
-
tz375
- Moto GP
- Posts: 6213
- Joined: Mon Nov 03, 2008 10:47 am
- Location: Illinois
Re: The road to over 100hp- easy enough with a GT 750?
Mr Finn,
Good to see you again. What HP did Brett manage with his 1000cc motor with 6 sets of reeds? Def need lots of reed and transfer area.
Good to see you again. What HP did Brett manage with his 1000cc motor with 6 sets of reeds? Def need lots of reed and transfer area.
-
Stephendownunder
- Still in the Driveway
- Posts: 9
- Joined: Mon May 06, 2013 10:52 pm
- Country: Australia
- Suzuki 2-Strokes: GT750B
Re: The road to over 100hp- easy enough with a GT 750?
Hi, well I was told by Brett that his dyno could only measure up to 200 hp…. So his bike was something more than 200 hp. Finny
