The road to over 100hp- easy enough with a GT 750?

Getting your blazingly fast Suzuki powerplant to perform even better!

Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan

Post Reply
User avatar
Alan H
Moto GP
Posts: 3160
Joined: Thu Feb 16, 2012 11:50 am
Country: England
Suzuki 2-Strokes: 4 x GT550s - J, M, A, B.
Location: The Republic of South Yorkshire

Re: The road to over 100hp- easy enough with a GT 750?

Post by Alan H »

A magic wand?
Think of how stupid the average person is, then realise that half of them are more stupid than that.
Stephendownunder
Still in the Driveway
Posts: 9
Joined: Mon May 06, 2013 10:52 pm
Country: Australia
Suzuki 2-Strokes: GT750B

Re: The road to over 100hp- easy enough with a GT 750?

Post by Stephendownunder »

Ok….200hp just to far for 750cc, but to be competitive with modern equipment you need 150hp. 50hp per 250cc doesn’t seem impossible. Surely it has been done or near as. Having said that I’ve only managed 119hp ! But that has very small GEM reeds…..
Finny
User avatar
tz375
Moto GP
Posts: 6204
Joined: Mon Nov 03, 2008 10:47 am
Location: Illinois

Re: The road to over 100hp- easy enough with a GT 750?

Post by tz375 »

Mr Finn,

Good to see you again. What HP did Brett manage with his 1000cc motor with 6 sets of reeds? Def need lots of reed and transfer area.
Stephendownunder
Still in the Driveway
Posts: 9
Joined: Mon May 06, 2013 10:52 pm
Country: Australia
Suzuki 2-Strokes: GT750B

Re: The road to over 100hp- easy enough with a GT 750?

Post by Stephendownunder »

Hi, well I was told by Brett that his dyno could only measure up to 200 hp…. So his bike was something more than 200 hp. Finny
Post Reply