Print out the chamber cone design

Suzukidave · Post by **Suzukidave** » Sun Mar 02, 2014 2:16 pm

Works great with your home printer http://www.conelayout.com/" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;

Fritz500 · Post by **Fritz500** » Tue Mar 11, 2014 9:41 am

I printed out a set but they blow apart when I accelerate. What glue should I be using?

Suzukidave · Post by **Suzukidave** » Tue Mar 11, 2014 9:52 am

Fritz500 wrote:I printed out a set but they blow apart when I accelerate. What glue should I be using?

I covered the outside of mine with duck tape and they hold up to hard riding

Suzukidave · Post by **Suzukidave** » Tue Mar 11, 2014 9:57 am

The shape of a flattened cone for a curved section is really strange its no wonder it can be difficult to hand make a chamber design .

Fritz500 · Post by **Fritz500** » Tue Mar 11, 2014 10:56 am

Suzukidave wrote:
Fritz500 wrote:I printed out a set but they blow apart when I accelerate. What glue should I be using?
I covered the outside of mine with duck tape and they hold up to hard riding

Ah duct tape...the answer to most of life's problems.

Post by **Alan H** » Tue Mar 11, 2014 2:37 pm

It has a light side and a dark side, and holds the universe together.

Cyzygy · Post by **Cyzygy** » Wed Mar 12, 2014 9:59 am

Silence is golden and duct tape is silver:-x

Suzukidave · Post by **Suzukidave** » Mon Mar 17, 2014 3:04 pm

Anyone try the free use ? Works good

Print out the chamber cone design

Print out the chamber cone design

Re: Print out the chamber cone design

Re: Print out the chamber cone design

Re: Print out the chamber cone design

Re: Print out the chamber cone design

Re: Print out the chamber cone design

Re: Print out the chamber cone design

Re: Print out the chamber cone design