Where would I be able to obtain a ts185 flywheel puller and how would I remove the flywheel?
Thanks
Flywheel removal
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
smokingbanana90
- Around the block
- Posts: 54
- Joined: Tue Jun 25, 2013 2:20 pm
- Country: USA
- Suzuki 2-Strokes: GT380 GT250 TS185 TS90 TC90 RV125
-
Ben
- On the street
- Posts: 43
- Joined: Fri May 17, 2013 9:09 am
- Country: Canada
- Suzuki 2-Strokes: 1 too few
Re: Flywheel removal
I bought one from local shop who ordered it in from a generic moto catalog. Mine is an rv125 and end up being a left hand thread at some size...can look it up...yours prob the same but search ebay and I bet you find the right model
Ben in Canada
71 CB500
74 RV125
75 RV125
84 RZ500
85 RZ500
94 DAJIBAN
00 VFR800
71 CB500
74 RV125
75 RV125
84 RZ500
85 RZ500
94 DAJIBAN
00 VFR800
-
turnofftheradio
- On the street
- Posts: 17
- Joined: Thu May 05, 2011 4:33 am
- Location: America's Hi-Five
Re: Flywheel removal
I used my standard el-cheapo automotive bolt on puller for it. Autozone will probably even rent you one. Make sure to use good bolts to hold it on, make sure they are not so long that they hit your coils under the flywheel. Hit it with an impact, then a whack and it pops off.
you can kinda see the puller off to the side here
you can kinda see the puller off to the side here
