Here are specs for X-6 expansion chambers that were used for drag racing by my Father and I.
I hope my dads knowledge will help someone who wants some chambers.
I will also upload a pic of some mounted on a bike raced by me in the 1970's when I was a kid.
X6 Hustler expansion chamber specs.
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
- On the street
- Posts: 20
- Joined: Sun Oct 14, 2012 8:45 pm
- Country: usa
- Suzuki 2-Strokes: 1975 gt 550
X6 Hustler expansion chamber specs.
You do not have the required permissions to view the files attached to this post.
-
- On the street
- Posts: 20
- Joined: Sun Oct 14, 2012 8:45 pm
- Country: usa
- Suzuki 2-Strokes: 1975 gt 550
Re: X6 Hustler expansion chamber specs.
By the way I also have specs for T-500 that I will upload as soon as I can draw a diagram.
-
- Around the block
- Posts: 74
- Joined: Sat Feb 02, 2013 1:34 pm
- Country: USA
- Suzuki 2-Strokes: Suzuki GT250 Hustler
- Location: New York, NY
- Contact:
Re: X6 Hustler expansion chamber specs.
Thanks for sharing
Ride Safe!
74' Suzuki GT250 Hustler - City Bike
03' Suzuki SV1000S - Street Bike
07' Yamaha YZF-R6 - Track Bike
http://www.leananglejeans.com" onclick="window.open(this.href);return false;
74' Suzuki GT250 Hustler - City Bike
03' Suzuki SV1000S - Street Bike
07' Yamaha YZF-R6 - Track Bike
http://www.leananglejeans.com" onclick="window.open(this.href);return false;
- tz375
- Moto GP
- Posts: 6204
- Joined: Mon Nov 03, 2008 10:47 am
- Location: Illinois
Re: X6 Hustler expansion chamber specs.
Thanks for digging up those dimensions. That is the Race Kit chamber described in page 3 of Suzuki's Bulletin #4 dated August 9, 1969 which has found itself all over the web but usually without any reference to where it originated. Bulletin #3 is Motocross/scrambles and #4 is road race and flat track. #5 issued a few days later was to fit larger 28mm carbs.
For drag racing that pipe was probably OK. I'd hate to use it on a street bike though
For drag racing that pipe was probably OK. I'd hate to use it on a street bike though
-
- On the street
- Posts: 20
- Joined: Sun Oct 14, 2012 8:45 pm
- Country: usa
- Suzuki 2-Strokes: 1975 gt 550
Re: X6 Hustler expansion chamber specs.
I know that dad got the specs from Suzuki, Probably through a friend who was a Suzuki dealer at the time. I agree that they would not be good for the street as they are VERY loud. With the stingers replaced by silencers, maybe.