T500 front foot pegs

General discussion about Offroad two-stroke Suzuki motorcycles.

Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan

Post Reply
User avatar
GT500Andy
To the on ramp
Posts: 227
Joined: Mon Oct 26, 2009 12:16 pm
Country: Netherlands
Suzuki 2-Strokes: T500R, GT500A, TS400, V strom black rhino
Location: Netherlands
Contact:

T500 front foot pegs

Post by GT500Andy »

Help where can I get new or good second hand front foot pegs part nr: 43550-16400

Andy
User avatar
jabcb
Moto GP
Posts: 4241
Joined: Mon Dec 13, 2010 4:32 pm
Country: USA
Suzuki 2-Strokes: 69 T350 thru 75 GT750
Location: southwestern Pennsylvania

Re: T500 front foot pegs

Post by jabcb »

New reproduction foot peg rubbers are avilable via US eBay for $38US
http://www.ebay.com/itm/Suzuki-T500-Fro ... 0868305388

Also available from Reproduction Decals for $85US (select non-oem parts / Suzuki twins)
http://www.reproductiondecals.com/defau ... .html~main

Haven't used them, so I don't know about the quality of either.
Another forum member might know about the quality or availability in Europe.
BAS (Bike Acquisition Syndrome) - too many bikes but have room for more

Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
User avatar
wvc
To the on ramp
Posts: 236
Joined: Mon Oct 11, 2010 1:15 pm
Location: Ohio, USA

Re: T500 front foot pegs

Post by wvc »

The reproductions made by Greg Clauss (the ebay ones) are good. He made the molds from a NOS peg I sent him. Only issue with them, is the inside bore isn't an interference fit. Its slightly larger than original, so you have to glue them to the metal part of the peg.
76 GT500 - restoration project in work
4 other 76 GT500's
1.5 GT550's
4 GT380's
5 T500's (72-75 models)
4 GT750's

Suzuki GT hoarder...and a bad case of OBD.....(old bike disease)
Post Reply