Hello,
I'm working on two different TS185's. One, a 1974 rat bike. The other, a 1975 clean example.
On the rat bike I'm trying to get it mechanically sound to sell as a simple trail bike for a few hundred.
I have found several discrepancies as if the previous owner(s) simply tried to make it work out of a pile of parts at a junk yard.
I have found the online parts diagrams confusing.
If anyone could post photos or descriptions of 1973 - 76 front axles, including spacer arrangement, washers, nuts, etc, I would be grateful.
I will attempt to post a couple of photos of what I am working with.
.
TS185 Front Axle Configurations
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
- Still in the Driveway
- Posts: 3
- Joined: Tue May 31, 2011 2:40 pm
-
- Still in the Driveway
- Posts: 3
- Joined: Tue May 31, 2011 2:40 pm
Re: TS185 Front Axle Configurations
.
This is what I have on my 1975 TS185M:
.
This is what I have on my 1974 TS185L:
.
The problem with the 1974 is that I'm missing the spacer that is next to the spacer / nut at the right side of the above photo.
I'm wondering if I could just swap the 1975 axle assembly to the 1974 so that I can sell it. I would then buy a used axle assembly for the 1975 to replace the donor.
.
This is what I have on my 1975 TS185M:
.
This is what I have on my 1974 TS185L:
.
The problem with the 1974 is that I'm missing the spacer that is next to the spacer / nut at the right side of the above photo.
I'm wondering if I could just swap the 1975 axle assembly to the 1974 so that I can sell it. I would then buy a used axle assembly for the 1975 to replace the donor.
.
-
- Still in the Driveway
- Posts: 3
- Joined: Tue May 31, 2011 2:40 pm
Re: TS185 Front Axle Configurations
.
Anyone in the Pacific Northwest want to buy a TS185?
.
Anyone in the Pacific Northwest want to buy a TS185?
.