Page 1 of 1

76 RM 370

Posted: Sun Oct 22, 2017 8:35 pm
by SR76RM370
Hi new the forum. I have a 1976 RM370 and I’m currently putting triple clamps and forks off of a 1979 RM400. My question is does anyone know what rubber mounts off of a current model bike and year will fit in the clamps? That’s the last piece of the puzzle that I haven’t been able to find. Thanks!!!!

Re: 76 RM 370

Posted: Mon Oct 23, 2017 4:30 am
by jabcb

Re: 76 RM 370

Posted: Tue Oct 24, 2017 8:38 pm
by Jimroid
If he is right, you owe him a cold beer or a batch of fresh cookies!

Re: 76 RM 370

Posted: Tue Oct 24, 2017 11:48 pm
by SR76RM370
Thank you very much. I actually have a seat of those rubber mounts. The prob is they only sit inside the triple clam about half way and have lots of movement. That’s why I was hoping someone has possibly used rubber mounts out of a modern bike that would fully seat into the triple clamp. Thanks for your input.

Re: 76 RM 370

Posted: Wed Oct 25, 2017 1:39 am
by jabcb
The online parts diagram shows that you need two on each side for a total of four. On each side, one is from the top of the upper triple tree & one is from the bottom of the upper triple tree.

Alternatively you could go with a rigid mounting with these aftermarket bushings:
https://www.ebay.com/itm/Suzuki-RM-RMZ- ... 2762534159