Page 1 of 1
1970 TS250 what to torque the top end down to?
Posted: Tue Jan 03, 2017 1:55 pm
by JimR
Hi, I'm just restoring my old '70 TS250. Just had the barrel bored and honed and fitted a new piston and rings, gaskets etc but I can find any info on the torque settings for both the cylinder and the head for this model. For now I've just done it by feel but that's not idea!
Here's a couple of pics
Cheers
Jim
Re: 1970 TS250 what to torque the top end down to?
Posted: Tue Jan 03, 2017 2:10 pm
by Jimroid
Probably 14 & 25 lb/ft. 8mm/10mm
Re: 1970 TS250 what to torque the top end down to?
Posted: Tue Jan 03, 2017 2:52 pm
by JimR
Jimroid wrote:Probably 14 & 25 lb/ft. 8mm/10mm
Cheers, are those figures from a later model?
Re: 1970 TS250 what to torque the top end down to?
Posted: Tue Jan 03, 2017 3:19 pm
by Jimroid
A generalized Suzuki service bulletin for across the models.
Re: 1970 TS250 what to torque the top end down to?
Posted: Tue Jan 03, 2017 3:40 pm
by JimR
Jimroid wrote:A generalized Suzuki service bulletin for across the models.
Nice one, thanks
Re: 1970 TS250 what to torque the top end down to?
Posted: Tue Jan 03, 2017 4:53 pm
by Alan H
JimR, you have a PM.
