Hi, I'm just restoring my old '70 TS250. Just had the barrel bored and honed and fitted a new piston and rings, gaskets etc but I can find any info on the torque settings for both the cylinder and the head for this model. For now I've just done it by feel but that's not idea!
Here's a couple of pics
Cheers
Jim
1970 TS250 what to torque the top end down to?
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
- Still in the Driveway
- Posts: 7
- Joined: Wed Dec 21, 2016 3:00 am
- Country: Australia
- Suzuki 2-Strokes: TS250 Mk2
- Jimroid
- To the on ramp
- Posts: 309
- Joined: Sun Feb 21, 2016 8:32 pm
- Country: USA
- Suzuki 2-Strokes: GT500 T500 GT750
- Location: Pisgah Forest, N.C. USA
Re: 1970 TS250 what to torque the top end down to?
Probably 14 & 25 lb/ft. 8mm/10mm
-
- Still in the Driveway
- Posts: 7
- Joined: Wed Dec 21, 2016 3:00 am
- Country: Australia
- Suzuki 2-Strokes: TS250 Mk2
Re: 1970 TS250 what to torque the top end down to?
Cheers, are those figures from a later model?Jimroid wrote:Probably 14 & 25 lb/ft. 8mm/10mm
- Jimroid
- To the on ramp
- Posts: 309
- Joined: Sun Feb 21, 2016 8:32 pm
- Country: USA
- Suzuki 2-Strokes: GT500 T500 GT750
- Location: Pisgah Forest, N.C. USA
Re: 1970 TS250 what to torque the top end down to?
A generalized Suzuki service bulletin for across the models.
-
- Still in the Driveway
- Posts: 7
- Joined: Wed Dec 21, 2016 3:00 am
- Country: Australia
- Suzuki 2-Strokes: TS250 Mk2
Re: 1970 TS250 what to torque the top end down to?
Nice one, thanksJimroid wrote:A generalized Suzuki service bulletin for across the models.
- Alan H
- Moto GP
- Posts: 3169
- Joined: Thu Feb 16, 2012 11:50 am
- Country: England
- Suzuki 2-Strokes: 4 x GT550s - J, M, A, B.
- Location: The Republic of South Yorkshire
Re: 1970 TS250 what to torque the top end down to?
JimR, you have a PM.
Think of how stupid the average person is, then realise that half of them are more stupid than that.