Sundial Moto Sports
http://www.suzuki2strokes.com/forum/

RV125 - ignition switch not affecting ignition
http://www.suzuki2strokes.com/forum/viewtopic.php?f=3&t=12487
Page 1 of 1

Author:  Ben [ Sun Aug 21, 2016 7:27 am ]
Post subject:  RV125 - ignition switch not affecting ignition

Hi Guys.

Working on a late 72 RV125.

Issue: the 3 position key ignition switch does not shut bike down or keep it from starting.

All 9 pins I checked with a multimeter and have continuity, switch seems good.

Bad ground?

Author:  Alan H [ Sun Aug 21, 2016 1:21 pm ]
Post subject:  Re: RV125 - ignition switch not affecting ignition

post a pic of the wiring diagram and we may be able to help.

Author:  jabcb [ Sun Aug 21, 2016 4:17 pm ]
Post subject:  Re: RV125 - ignition switch not affecting ignition

Wiring diagram is here: http://www.suzuki2strokes.com/forum/viewtopic.php?f=9&t=10789

Looks like your bike shuts the magneto ignition off by grounding it to the switch housing.
If you've done something like powder coat the frame, then you have eliminated the switch ground.

Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/