Gt500 ignition coil
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
suzukigt500
- Still in the Driveway
- Posts: 5
- Joined: Sun Feb 10, 2013 6:03 pm
- Country: usa
- Suzuki 2-Strokes: gt500
Gt500 ignition coil
Just curious if any of you folks ran a gsxr ignition coil on your gt500 if so what year gsxr? Or what else is compatible ?
-
rbond
- Yeah Man, the Interstate
- Posts: 686
- Joined: Mon Nov 24, 2008 12:22 pm
- Location: Alexandria, La.
- Contact:
Re: Gt500 ignition coil
I used a Dynatek Dyna S coil listed for a Harley. Two output connections and electrically rated same as OEM. Half the price of OEM and has been working fine for 6 years on my GT500.
-
tz375
- Moto GP
- Posts: 6204
- Joined: Mon Nov 03, 2008 10:47 am
- Location: Illinois
Re: Gt500 ignition coil
I grabbed a bunch of GS500 coils for my GT750 and also use them on single spark Hondas. Not suitable for twin lead replacements though.
-
jabcb
- Moto GP
- Posts: 4241
- Joined: Mon Dec 13, 2010 4:32 pm
- Country: USA
- Suzuki 2-Strokes: 69 T350 thru 75 GT750
- Location: southwestern Pennsylvania
Re: Gt500 ignition coil
Those Dyna S coils probably provide a much better spark. Do they fit the stock GT500 coil bracket?rbond wrote:I used a Dynatek Dyna S coil listed for a Harley.
Which GS500 are the coils for? Do they fit the stock GT750 coil brackets?tz375 wrote:I grabbed a bunch of GS500 coils for my GT750 and also use them on single spark Hondas.
BAS (Bike Acquisition Syndrome) - too many bikes but have room for more
Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
-
rbond
- Yeah Man, the Interstate
- Posts: 686
- Joined: Mon Nov 24, 2008 12:22 pm
- Location: Alexandria, La.
- Contact:
Re: Gt500 ignition coil
My Dyna S is a green colored (I thing the color is important......), no it does not fit stock bracket. Had to zip tie in place. Used a pair of automotive rated, large ties so I would not have to worry about age, heat breakage. I think Dyna has changed the design of their coils, so they might have one that would fit the bracket. Still cheaper than OEM. Mine is still working great!
