Suzuki 2 Strokes

Working on the from-scratch wiring for our GT250 cafe build.
Am using a Nissin Daytona front master brake cylinder, # 43337.
It comes with the brake light switch shown in the pic.

Am looking for a black electrical connector for the switch. Anyone have a link?

Figured this out.

Use 4.8mm spade terminals. Available from Cycle Terminal & eBay.
http://www.cycleterminal.com/spade-terminals.html

You can use the terminals with the covers or a dedicated socket. I have a few of the sockets if you need one.

Thanks for the offer. I used individual spade terminals & already have that part of the wiring done.