wiring connector for Nissin brake master cylinder switch

All to do with wiring, charging or just trying to figure out whats gone wrong.

Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan

Post Reply
User avatar
jabcb
Moto GP
Posts: 4240
Joined: Mon Dec 13, 2010 4:32 pm
Country: USA
Suzuki 2-Strokes: 69 T350 thru 75 GT750
Location: southwestern Pennsylvania

wiring connector for Nissin brake master cylinder switch

Post by jabcb »

Working on the from-scratch wiring for our GT250 cafe build.
Am using a Nissin Daytona front master brake cylinder, # 43337.
It comes with the brake light switch shown in the pic.

Am looking for a black electrical connector for the switch. Anyone have a link?

Image
BAS (Bike Acquisition Syndrome) - too many bikes but have room for more

Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
User avatar
jabcb
Moto GP
Posts: 4240
Joined: Mon Dec 13, 2010 4:32 pm
Country: USA
Suzuki 2-Strokes: 69 T350 thru 75 GT750
Location: southwestern Pennsylvania

Re: wiring connector for Nissin brake master cylinder switch

Post by jabcb »

Figured this out.

Use 4.8mm spade terminals. Available from Cycle Terminal & eBay.
http://www.cycleterminal.com/spade-terminals.html
BAS (Bike Acquisition Syndrome) - too many bikes but have room for more

Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
User avatar
Suzsmokeyallan
Moto GP
Posts: 4326
Joined: Fri Oct 24, 2008 9:11 am
Location: Mostly Barbados, sometimes Florida and western Canada
Contact:

Re: wiring connector for Nissin brake master cylinder switch

Post by Suzsmokeyallan »

You can use the terminals with the covers or a dedicated socket. I have a few of the sockets if you need one.
Two strokes, its just that simple.

69 Suz U70
69 Suz T500
72 Suz GT750 cafe
74 Suz TS250
74 Suz GTXVR project
75 Suz RE5
75 Suz GT750
76 Suz TS400
76 Suz GT750
81 Suz GSX1100
86 Suz RG500x2
88 Hon CR500
93 Hon CBR900RR
98 Suz GSF1200x3
15 Kaw Ninja H2
User avatar
jabcb
Moto GP
Posts: 4240
Joined: Mon Dec 13, 2010 4:32 pm
Country: USA
Suzuki 2-Strokes: 69 T350 thru 75 GT750
Location: southwestern Pennsylvania

Re: wiring connector for Nissin brake master cylinder switch

Post by jabcb »

Thanks for the offer. I used individual spade terminals & already have that part of the wiring done.
BAS (Bike Acquisition Syndrome) - too many bikes but have room for more

Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
Post Reply