Canadian edition RG250 Gamma - CDI box alternative
Posted: Wed Jul 22, 2015 10:45 am
Hello, this is my first post here on the forum. I've got a few bikes (Honda NS400R, Yam RZ350, Yam FZR400, RG250 Gamma0. Im currently restoring the 87 RG250 Gamma (Canadian edition), I have no spark and and I need a CDI box suitable replacement.
Strangely, the Suzuki parts fiche and all the avaialable CDI's list/show a small 5 pin CDI for this bike (mounted beside the Reg Rec inthe center of the bike frame). The Canadian Gamma however, has a 6 pin 2 plug CDI and corresponding 2 wiring harness plugs (mounted on the left side of the toolbox). for some reason the Canadian bikes are different to the others sold around the world (?). With only 120 Canadian Gamma's imported, finding a NOS 6 pin seems unlikely unless I can find out what other bike may have used a similar 6 pin/2 plug CDI box
Where would a fellow go about getting an aftermarket 6 Pin CDI for such a bike ?
Any help or guidance is appreciated, I'm no ignition/electrical expert.
Strangely, the Suzuki parts fiche and all the avaialable CDI's list/show a small 5 pin CDI for this bike (mounted beside the Reg Rec inthe center of the bike frame). The Canadian Gamma however, has a 6 pin 2 plug CDI and corresponding 2 wiring harness plugs (mounted on the left side of the toolbox). for some reason the Canadian bikes are different to the others sold around the world (?). With only 120 Canadian Gamma's imported, finding a NOS 6 pin seems unlikely unless I can find out what other bike may have used a similar 6 pin/2 plug CDI box
Where would a fellow go about getting an aftermarket 6 Pin CDI for such a bike ?
Any help or guidance is appreciated, I'm no ignition/electrical expert.