Suzuki2Strokes.com

Sundial Moto Sports

Suzuki Two-Stroke Message Board
Suzuki2Strokes.com
It is currently Fri Jul 19, 2019 1:00 am

All times are UTC - 6 hours




Post new topic Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Tue Feb 12, 2019 7:03 am 
Offline
To the on ramp

Joined: Fri Aug 11, 2017 7:09 am
Posts: 374
Country: england
Bikes owned: several gt250 ramairs
i've seen the great result of allan's gauge resto's, but those inner white casings look like new. are they new or is there some was of getting the orange discolouration off them? i've tried alsorts, but nothing seems to work. photo below of some i did years ago and the orange is plain to see. spoils it somewhat :( some are worse than others, but nearly all my spare inner casing have this orange colour on them and i'm blowed if i can get it off. any ideas? secrets?
cheers, dd.
Image

_________________
GTS250 road registered. TS250 engine, Ramair frame.
GT250 big bang road registered. Both pistons fire the same time. USD forks.
GT285 road registered. Overbored - 58mm and TS125 +2 pistons fitted.
GT10 road registered. '65 T10 engine, GT250 frame.


Top
 Profile  
 
PostPosted: Tue Feb 12, 2019 8:17 am 
Offline
On the main road

Joined: Fri May 30, 2014 5:41 am
Posts: 193
Location: High Peak Derbyshire.
Country: UK
Bikes owned: Suzuki GT380 B- Yamaha FZ1
Hi,
I think that the orange discolouration is actually the old glue that holds the lens in place, well at least it was on my 380 clocks. I found the only way to get rid of it was to remove the old lenses and scrape out the old glue, then I replaced with new lenses bought off e-bay. Only time will tell if the glue I used will react the same way.


Top
 Profile  
 
PostPosted: Wed Feb 13, 2019 5:19 am 
Offline
To the on ramp

Joined: Fri Aug 11, 2017 7:09 am
Posts: 374
Country: england
Bikes owned: several gt250 ramairs
ee, another derbyshire lad :D tbh, i don't think it's glue, as i always clean them thoroughly. it's just nasty discolouration that refuses to be moved. the only thing i haven't tried is polishing it out with different grades of compound, like on milky headlamp/taillamp lenses. the glue i use for sticking acrylic lenses [and plastic sidepanels] is technicoll polychloride for hard plastics. takes a long while to go off, but when it does, it's STUCK. that's it near the bottom of my photo.
cheers, dd.

_________________
GTS250 road registered. TS250 engine, Ramair frame.
GT250 big bang road registered. Both pistons fire the same time. USD forks.
GT285 road registered. Overbored - 58mm and TS125 +2 pistons fitted.
GT10 road registered. '65 T10 engine, GT250 frame.


Top
 Profile  
 
PostPosted: Wed Feb 13, 2019 6:41 am 
Offline
On the main road

Joined: Fri May 30, 2014 5:41 am
Posts: 193
Location: High Peak Derbyshire.
Country: UK
Bikes owned: Suzuki GT380 B- Yamaha FZ1
Hi dollydog,
Are you saying you clean the outside of the lens ? I was talking about the underside of the lens where it sits in the recess of the outer casing and where the glue is applied.
Yup another Derbyshire lad in New Mills.


Top
 Profile  
 
PostPosted: Sat Feb 16, 2019 1:57 pm 
Offline
Novice racer

Joined: Wed Jul 10, 2013 12:04 pm
Posts: 981
Country: England, UK
Bikes owned: FZ50, GP100, RG125 Gamma, GT380, Bandit 1200S
I removed the workings then, used a fresh Stanley knife blade to scrape it off on mine. Painstaking work, took me ages.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group
Sundial Moto Sports forum © by Eric F. Kalamaja
Suzuki2Strokes.com