I'm ready to start putting paychecks into my bike...

Retro, Wild, Cafe, etc. The stuff only your imagination can come up with.

Moderators: oldjapanesebikes, H2RICK, Suzsmokeyallan

User avatar
tz375
Moto GP
Posts: 6204
Joined: Mon Nov 03, 2008 10:47 am
Location: Illinois

Re: I'm ready to start putting paychecks into my bike...

Post by tz375 »

gtron wrote:..................... i made a rubber ring in the standard inlets
grtz,
ron
Sorry Ron, I did not understand that last comment. :? :)
User avatar
gtron
On the street
Posts: 12
Joined: Sun Aug 26, 2012 3:47 pm
Country: holland
Suzuki 2-Strokes: TR750,GT750,GSXR 1100

Re: I'm ready to start putting paychecks into my bike...

Post by gtron »

tz375 wrote:
gtron wrote:..................... i made a rubber ring in the standard inlets
grtz,
ron
Sorry Ron, I did not understand that last comment. :? :)

i try again, i made a (flange,ring,circle, from rubber) inside the standard rubber inlet for the 34mm mikuni.
ihope you understand, if you have the inlet rubber from J and K model it is no problem
greets,
ron
sorry for my english
User avatar
Suzukidave
Moto GP
Posts: 3980
Joined: Fri Oct 24, 2008 5:55 pm
Country: US
Suzuki 2-Strokes: GT750 x2 97 -1200 Bandit 86 GSXR1100
Location: Lancaster Pa.

Re: I'm ready to start putting paychecks into my bike...

Post by Suzukidave »

Oh .. a adapter to fit into the stock connector , i remember Ringding made one also for his carbs on Blue Boy out of PVC .
the older i get the faster i was
User avatar
gtron
On the street
Posts: 12
Joined: Sun Aug 26, 2012 3:47 pm
Country: holland
Suzuki 2-Strokes: TR750,GT750,GSXR 1100

Re: I'm ready to start putting paychecks into my bike...

Post by gtron »

Suzukidave wrote:Oh .. a adapter to fit into the stock connector , i remember Ringding made one also for his carbs on Blue Boy out of PVC .

yes!!! thanks Dave
User avatar
tz375
Moto GP
Posts: 6204
Joined: Mon Nov 03, 2008 10:47 am
Location: Illinois

Re: I'm ready to start putting paychecks into my bike...

Post by tz375 »

Thanks guys. That makes perfect sense now.
User avatar
gtron
On the street
Posts: 12
Joined: Sun Aug 26, 2012 3:47 pm
Country: holland
Suzuki 2-Strokes: TR750,GT750,GSXR 1100

Re: I'm ready to start putting paychecks into my bike...

Post by gtron »

007.jpg
021.jpg
img009 METNAAMklein.jpg
You do not have the required permissions to view the files attached to this post.
Cragdog
To the on ramp
Posts: 267
Joined: Mon Oct 14, 2013 2:25 pm
Country: USA
Suzuki 2-Strokes: GT550L, PE250B, RM250N
Location: Southern California

Re: I'm ready to start putting paychecks into my bike...

Post by Cragdog »

Woww, that is a gorgeous bike! :clap: :up:
If you like it, then you should ride it.

1974 Suzuki GT550
1977 Suzuki PE250
1992 Suzuki RM250
1988 Yamaha YZ250
1970 Honda CB750 K0
aslsmm
On the main road
Posts: 151
Joined: Mon Jun 10, 2013 6:04 am
Country: us
Suzuki 2-Strokes: 73 gt 750 74 gt550

Re: I'm ready to start putting paychecks into my bike...

Post by aslsmm »

wow, this kinda takes wind out of my sails for my build. i'm not sure i can live up to these kind of bikes. just amazing. now imagine how silly some on a HD or honda will feel when you pull up next to them at the light.

seriously the coolest bike on the block.
User avatar
gtron
On the street
Posts: 12
Joined: Sun Aug 26, 2012 3:47 pm
Country: holland
Suzuki 2-Strokes: TR750,GT750,GSXR 1100

Re: I'm ready to start putting paychecks into my bike...

Post by gtron »

005.JPG
You do not have the required permissions to view the files attached to this post.
User avatar
gtron
On the street
Posts: 12
Joined: Sun Aug 26, 2012 3:47 pm
Country: holland
Suzuki 2-Strokes: TR750,GT750,GSXR 1100

Starting for the first time with the rollerstarter

Post by gtron »

Starting for the first time with the rollerstarter


http://youtu.be/46VlZKtbD8Y
Post Reply