jabcb wrote:Do you have pics of the tank mounts you used?
not really. I have some pics below but they don't really show the mount all that well.
The XS750 tank uses a cup piece on the tank and the rubber puck is on the frame.
All you need are two of these rubber pucks seen here: https://www.mikesxs.net/yamaha-xs650-fr ... 81-00.html" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;
You then have to figure out a way to get those pucks mounted to the frame. In the case of the T500, it was pretty easy. The width of the frame happened to be the exact width between the mounting cups on the tank itself. All you have to do is mark where they should go. I then welded a steel rod to each side of frame. See first pic below. Then you place the rubber puck linked above onto the steel rod (see second pic) and the tank slides right on. Its hard to explain, but easy to figure out.
Take note of the location of the new mounts compared to the stock mounts which are still on the frame slightly in front or and below the new mounts.
after enjoying this motorcycle for two years, I decided to let it go. I tried on ebay and craigslist with no success. Ultimately I listed it on bringatrailer and the response was overwhelmingly positive. When the "hammer fell", I walked away with $12,100 for the bike! I could not be more happy with the outcome. The bike will be going to New York to join a collection that includes a Yamaha RD and Kawasaki H1.
Thanks for all the help that everyone has provided here. I will be posting a bunch of T500 parts here in the upcoming days- including oil pump and lines, clutch basket, stock exhaust and headers, and a bunch of other parts.
I used part of the stock rear fender. I cut about 1/2 of it off and mounted underneath frame rails.
Check out the pics from my bringatrailer auction above. There should be a pic taken from back of bike that shows underneath the seat pan.