Suzuki2Strokes.com

Sundial Moto Sports

Suzuki Two-Stroke Message Board
Suzuki2Strokes.com
It is currently Thu Nov 23, 2017 2:41 pm

All times are UTC - 6 hours




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: T125 Project
PostPosted: Tue Nov 07, 2017 6:40 pm 
Offline
Still in the Driveway

Joined: Fri Nov 03, 2017 6:34 pm
Posts: 4
Country: United States
Bikes owned: GSXRs,T125,T20,etc
Well I figured I would start a build thread rather than posting all my individual questions in the general street bike area.

I finally snagged a T125 a while back, it was in very corroded shape but was complete. I plan on restoring it and also modifying it also.
Here is a picture of how the bike sits now, working on putting a T20 front end on it now.
Image

Got the engine out and torn down and now starting the hunt for parts.
Image

My main question right now is on the main bearings. This is my first engine rebuild on a horizontally split case. What are my options for getting bearings the have the appropriate grooves and holes for the retaining clips/posts? I can find the right sized bearings but they do not have the grooves and blind holes. I have seen some people use loctite to keep the bearings from spinning.

Also, anyone know of other later model bikes that share the same middle seal or these other non-generic crankshaft parts? GT185 maybe?

Thanks,


Top
 Profile  
 
 Post subject: Re: T125 Project
PostPosted: Wed Nov 08, 2017 9:18 am 
Offline
Around the block

Joined: Fri Aug 11, 2017 7:09 am
Posts: 83
Country: england
Bikes owned: several gt250 ramairs
try this for all the parts numbers [usually] :D
http://www.alpha-sports.com/suzuki_parts.htm
cheers, dd.

_________________
RGT250LC road registered. RG250 gamma engine, Ramair frame.
GT250 big bang road registered. Both pistons fire the same time. USD forks.
GT285 road registered. Overbored - 58mm and TS125 +2 pistons fitted.
GT10 road registered. '65 T10 engine, GT250 frame.


Top
 Profile  
 
 Post subject: Re: T125 Project
PostPosted: Tue Nov 14, 2017 3:40 pm 
Offline
Still in the Driveway

Joined: Fri Nov 03, 2017 6:34 pm
Posts: 4
Country: United States
Bikes owned: GSXRs,T125,T20,etc
Besides the bearings and seals are there any other parts on that crank I should plan on replacing? I plan on sending it to Crank Works to be rebuilt so they will be installing all the inner components.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 6 hours


Who is online

Users browsing this forum: 2STROKECAFE and 17 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group
Sundial Moto Sports forum © by Eric F. Kalamaja
Suzuki2Strokes.com