Mikuni BS40 Carb settings - confusion no more!
Posted: Sat Jul 30, 2011 6:09 am
Hi all,
Couple of quick questions for the BS40 experts:
1. Pilot screw adjustment: Suzuki shop manual states 1/4 turn out for Pilot Screw. Haynes says 3/4 turns. Which is correct?
2. Float Bowl Gasket: I am not sure that I have the gasket in the right way around in my pic below. The shop manual says to have the extra hole "opposite" the starter pipe. Not sure whether I have interpreted "opposite" correctly.
As always, your advice & counsel greatly appreciated!
Couple of quick questions for the BS40 experts:
1. Pilot screw adjustment: Suzuki shop manual states 1/4 turn out for Pilot Screw. Haynes says 3/4 turns. Which is correct?
2. Float Bowl Gasket: I am not sure that I have the gasket in the right way around in my pic below. The shop manual says to have the extra hole "opposite" the starter pipe. Not sure whether I have interpreted "opposite" correctly.
As always, your advice & counsel greatly appreciated!