Sundial Moto Sports
http://www.suzuki2strokes.com/forum/

Back in business
http://www.suzuki2strokes.com/forum/viewtopic.php?f=20&t=13147
Page 1 of 1

Author:  TPS [ Sat Oct 07, 2017 1:57 am ]
Post subject:  Back in business

Finally I have the GT back at home and running sweet again. Thought i better jump back in here and share a picture.

Attachments:
File comment: 750M
20171007_174354-1-1_resized.jpg
20171007_174354-1-1_resized.jpg [ 547.37 KiB | Viewed 2040 times ]

Author:  garry55 [ Sat Oct 07, 2017 3:10 am ]
Post subject:  Re: Back in business

sweet :up:

like the fairing.

Author:  Jimroid [ Sat Oct 07, 2017 3:37 am ]
Post subject:  Re: Back in business

What a beauty! Nicely done!

Author:  TPS [ Sat Oct 07, 2017 7:03 am ]
Post subject:  Re: Back in business

Cheers, yes she came up well. It's been 8 yrs since restoration, the fairing is a Dunstall 750 four fairing made to fit with some creative bracket work and some drag bars. Looks different on a GT. She spent quite a few yrs with family nterstate but stored well so didnt need much . Some of the polished alloy has lost it's lustre so i might get back into that again,

All in all im just happy to have the old girl back and running :)

Author:  tz375 [ Sat Oct 07, 2017 5:58 pm ]
Post subject:  Re: Back in business

Looks good with that Dunstall fairing on it. There's someone in QLD or northern NSW with the same fairing on an M model. I'm sure that one had a Bromlech 3 into 1 exhaust.

My Dunstall GT750 is not a stock GT color.

http://pinkpossum.com/miscbikestuff/DSCN9721.JPG

Author:  TPS [ Sat Oct 07, 2017 11:03 pm ]
Post subject:  Re: Back in business

Tz, mate that looks fantastic. What bars do you have on that machine? Clip ons?

You are probably thinking of the same bike. I was in Brissy and the fairng was blue some time back. Looks better colour matched. I still have the Bromlech system hanging in the shed. :up:

Just need to pick up where i left off 6 yrs ago getting the jetting right for the Higspeed chambers.

Author:  TPS [ Sun Oct 08, 2017 1:05 am ]
Post subject:  Re: Back in business

Here is the Bromlech hanging on the wall, :up:

Attachments:
2017-10-08 18.05.33.jpg
2017-10-08 18.05.33.jpg [ 337.78 KiB | Viewed 2007 times ]

Author:  jabcb [ Sun Oct 08, 2017 1:29 am ]
Post subject:  Re: Back in business

Congrats on the sweet looking results! :up:

Author:  sportston [ Mon Oct 09, 2017 8:30 am ]
Post subject:  Re: Back in business

She looks beautiful. Nice with the Higgspeeds.

Author:  tz375 [ Mon Oct 09, 2017 10:12 am ]
Post subject:  Re: Back in business

Blue it was. I screen grabbed all the pictures you posted with the old screen name.

I tried 3 or 4 different bends and ended up using a set of Drag bars. They are flat and bent back just enough to work with the Hyabusa footpegs, but the seat is too tall with those longer shocks. I need to refit the OEM shocks so I can reach the ground.

I like the new paint scheme and especially way you did those matching stripes.

Author:  TPS [ Tue Oct 17, 2017 5:30 am ]
Post subject:  Re: Back in business

You are all over it mate, the 2 stroke community really is a small world.

The fairing came up really well, It almost looks made for it in the standard colour. There are a couple of new spacers under the back mounts now, they help with the bar clearance and clean the lines up a bit. But it still doesnt look quite right from side on. The lines just are not right for the GT, but it grows on you.

Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/