t500 engine

Photos and progress of your restorations, even bikes you had but no longer own.

Moderators: oldjapanesebikes, H2RICK, Suzsmokeyallan

Post Reply
User avatar
stevebee
On the main road
Posts: 108
Joined: Wed Feb 13, 2013 2:04 am
Country: australia
Suzuki 2-Strokes: t500 kawasaki z900 harley davidson flsti
Location: nsw

t500 engine

Post by stevebee »

have started to rebuild a 1971 motor . I purchased 1976 engine cases and have noticed the 71 oil filler is screwed into the case, the 76 is push in. was thinking of taking case to a machine shop and have them tap a thread for me or does the 76 push in have a dipstick . steve
User avatar
joolstacho
To the on ramp
Posts: 390
Joined: Sun Jul 13, 2014 7:55 pm
Country: Australia
Suzuki 2-Strokes: AS50, GS500, GT500, ex GSXR750 slabbie
Location: Greendale Vic, Australia
Contact:

Re: t500 engine

Post by joolstacho »

No dipstick on the (GT500) push-in oil filler plug I'm told, - just use the little screw lower down to check oil level.
(There must have been a reason they didn't include a dipstick, mystery to me though).
User avatar
stevebee
On the main road
Posts: 108
Joined: Wed Feb 13, 2013 2:04 am
Country: australia
Suzuki 2-Strokes: t500 kawasaki z900 harley davidson flsti
Location: nsw

Re: t500 engine

Post by stevebee »

thanks
diamondj
Road race school
Posts: 785
Joined: Tue Oct 14, 2008 11:00 pm
Location: Wharton, NJ USA

Re: t500 engine

Post by diamondj »

Aren't the 76 cases milled differently in the stator area for the PEI ignition versus the points system on the 71.
Pete O'Dell
On the main road
Posts: 185
Joined: Tue Oct 09, 2012 1:52 pm
Country: uk
Suzuki 2-Strokes: T500X2 GT500 GS750 GS500/4 KAWASAKI A1 GT250

Re: t500 engine

Post by Pete O'Dell »

diamondj wrote:Aren't the 76 cases milled differently in the stator area for the PEI ignition versus the points system on the 71.

yep they are
Post Reply