Suzuki2Strokes.com

Sundial Moto Sports

Suzuki Two-Stroke Message Board
Suzuki2Strokes.com
It is currently Fri Dec 06, 2019 2:53 am

All times are UTC - 6 hours




Post new topic Reply to topic  [ 37 posts ]  Go to page Previous  1, 2, 3
Author Message
PostPosted: Mon Dec 25, 2017 2:28 pm 
Offline
Expert racer

Joined: Wed Jul 10, 2013 12:04 pm
Posts: 1035
Country: England, UK
Bikes owned: FZ50, GP100, RG125 Gamma, GT380, Bandit 1200S
sportston wrote:
Component number 15, which is part number 34192-33600
I would also like 34181-33600 which is number 14 in the picture but that is not available too.

I finally got one! I am so chuffed.
Got it here
http://www.classicsuzukiparts.nl/2strokemenu/?lang=en


Top
 Profile  
 
PostPosted: Tue Feb 26, 2019 4:32 pm 
Offline
On the main road
User avatar

Joined: Mon Oct 24, 2016 12:35 pm
Posts: 172
Location: Macon, GA
Country: USA
Bikes owned: 76 GT750, 72 H2 750, 84 RZ350, 67 YR1, 82 MB5
Suzsmokeyallan wrote:
The first set of part numbers listed are for converting your old GT750 7 inch sealed beam unit to an H4 Halogen unit.
Since a few numbers have changed over the years and show up as NLA for the 74 to 77 GT750 headlamp reflector and its related parts, I have included the present numbers for the H.L bowl and its related parts

H.L conversion to H4 halogen
35121-34430 H4 reflector unit, Koito brand (symmetrical flute pattern) used in the mid to late 80s GS500.
35136-34400 retainer ring for the H4 bulb
35173-20A01 rubber sealing boot for the H4 bulb

H.L bowl and related parts.
35127-45030 H.L reflector mounting ring, front (3 screw type)
35130-45030 H.L reflector mounting ring, rear (3 screw type)
35111-01D20 H.L bowl rim (chrome) round type for L,M,A,B models only
51810-34130 H.L bowl (chrome) round type for L,M,A,B models but now with oval shaped harness holes.


I am in the process of doing the halogen H4 headlight conversion for my 76 GT750A. I have bought the first three part #’s with the Koito H4 reflector unit light glass, the retainer ring, and rubber sealing boot. I also have a new H4 bulb. What else do I need to adapt and mount this to the stock original headlight shell? Do I need the first two referenced #’s in the above 2nd paragraph plus which of the last two #’s? Which chrome rim do I need to mount up to the original shell? Any and all help greatly apprecizted!

_________________
1976 Suzuki GT750 (Maui Blue), 1972 Kawasaki H2 750 Mach IV (Candytone Blue), 1984 Yamaha RZ350 (KRR- Yellow/ Black).


Top
 Profile  
 
PostPosted: Wed Feb 27, 2019 4:27 am 
Offline
Moto GP
User avatar

Joined: Mon Dec 13, 2010 4:32 pm
Posts: 3477
Location: southwestern Pennsylvania
Country: USA
Bikes owned: 69 T350 thru 75 GT750
Evans Ward wrote:
Suzsmokeyallan wrote:
The first set of part numbers listed are for converting your old GT750 7 inch sealed beam unit to an H4 Halogen unit.
Since a few numbers have changed over the years and show up as NLA for the 74 to 77 GT750 headlamp reflector and its related parts, I have included the present numbers for the H.L bowl and its related parts

H.L conversion to H4 halogen
35121-34430 H4 reflector unit, Koito brand (symmetrical flute pattern) used in the mid to late 80s GS500.
35136-34400 retainer ring for the H4 bulb
35173-20A01 rubber sealing boot for the H4 bulb

H.L bowl and related parts.
35127-45030 H.L reflector mounting ring, front (3 screw type)
35130-45030 H.L reflector mounting ring, rear (3 screw type)
35111-01D20 H.L bowl rim (chrome) round type for L,M,A,B models only
51810-34130 H.L bowl (chrome) round type for L,M,A,B models but now with oval shaped harness holes.


I am in the process of doing the halogen H4 headlight conversion for my 76 GT750A. I have bought the first three part #’s with the Koito H4 reflector unit light glass, the retainer ring, and rubber sealing boot. I also have a new H4 bulb. What else do I need to adapt and mount this to the stock original headlight shell? Do I need the first two referenced #’s in the above 2nd paragraph plus which of the last two #’s? Which chrome rim do I need to mount up to the original shell? Any and all help greatly apprecizted!

The H4 headlight that you bought fits the stock GT750 headlight bowl + related parts.

The 2nd group of part #s, “H.L bowl and related parts”, lists the current part numbers for those parts. They are only needed if you need to replace those parts because yours are bad.

_________________
BAS (Bike Acquisition Syndrome) - too many bikes but have room for more

Suzuki:
GT750 2x75
GT550 72 project & 75
GT380 72
T500 73 project
T350 69, 71 & 72 project
T250 72
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE


Top
 Profile  
 
PostPosted: Wed Feb 27, 2019 9:02 am 
Offline
On the main road
User avatar

Joined: Mon Oct 24, 2016 12:35 pm
Posts: 172
Location: Macon, GA
Country: USA
Bikes owned: 76 GT750, 72 H2 750, 84 RZ350, 67 YR1, 82 MB5
Thanks Jacob. I believe I bought a GS series headlight that won’t fit the stock bowl as the ring rim screw mount positions don’t align. I went and bought a GS500 Light today with the mounting ring so I think I’ll be good once that comes in.

_________________
1976 Suzuki GT750 (Maui Blue), 1972 Kawasaki H2 750 Mach IV (Candytone Blue), 1984 Yamaha RZ350 (KRR- Yellow/ Black).


Top
 Profile  
 
PostPosted: Wed May 15, 2019 10:21 am 
Offline
I likes them jubblies
User avatar

Joined: Wed Oct 15, 2008 11:19 am
Posts: 2327
Location: OL BLIGHTY uk
Country: uk
Bikes owned: tracer 700
muffler ring between the down pipe and silencers as you are expensive.
I've found an alternative and it work.
fitted a pair onto my bike(tight but once in its fine)
VAUXHALL SENATOR B Crankshaft Oil Seal Transmission End 78 to 93 Payen 3456314
only £7 uk pounds.

https://www.ebay.co.uk/itm/VAUXHALL-SEN ... ctupt=true

_________________
If I wanted to make a life-long career out of
working with the mentally retarded I would
have opened a Harley Davidson Dealership


Top
 Profile  
 
PostPosted: Thu Oct 10, 2019 2:27 pm 
Offline
On the street

Joined: Fri Aug 24, 2012 1:47 pm
Posts: 35
Country: England
Bikes owned: T 250 t500 gt 550
Hi just thought i would let you know about these replacement LED bulbs for the instrument cluster on my GT 750 j
the official bulbs retail at nearly £10 per bulb including postage but these are £1.99 each including postage

They are available in different colours but i have put a white one in my temperature guage and its much brighter than the original

I i havent tried replacing the bulbs in the speedo or rev counter yet but intend to do so .
THE ITEM REF IS 281 BA7S LUCAS TYPE LLB281CAR DASH PANEL

the seller was auto-illuminate-uk but im guessing others also sell them


Top
 Profile  
 
PostPosted: Thu Oct 10, 2019 3:00 pm 
Offline
To the on ramp

Joined: Fri Aug 11, 2017 7:09 am
Posts: 412
Country: england
Bikes owned: several gt250 ramairs
don't forget monkey man, if you do the indicator idiot light you will need 2 led's, otherwise it only works for one side. i bought the single led's with long tails already attached, wired them in, one to left and one to right side and they work perfectly :D
cheers, dd.

_________________
GTS250 road registered. TS250 engine, Ramair frame.
GT250 big bang road registered. Both pistons fire the same time. USD forks.
GT285 road registered. Overbored - 58mm and TS125 +2 pistons fitted.
GT10 road registered. '65 T10 engine, GT250 frame.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 37 posts ]  Go to page Previous  1, 2, 3

All times are UTC - 6 hours


Who is online

Users browsing this forum: Alan H and 55 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
Sundial Moto Sports forum © by Eric F. Kalamaja
Suzuki2Strokes.com