Page 1 of 1
Tool kit find.
Posted: Sat Jan 25, 2014 5:01 pm
by Suzsmokeyallan
Found this on Ebay the other day for a steal of a deal, it was just too good to pass up. There is a screwdriver and phillips bit included as well thats not shown in the photo.
The box wrench, its extension and bar are for a T500 which you rarely find these days, so that helps complete one of my T500 kits. The points spanner and feeler gauge is always a welcome find as well. Then there's that very short prybar with flattened ends like a baby tyre tool. Its not listed in any Suzuki tool kits I know of, but its there as part of the deal.

Re: Tool kit find.
Posted: Sun Jan 26, 2014 12:09 am
by oldjapanesebikes
Nice catch !

What colour is the screw driver handle ?

Re: Tool kit find.
Posted: Sun Jan 26, 2014 7:04 am
by Suzsmokeyallan
If anyone was going to reply to this post I knew it would be you Ian,,

sadly its a black one and not a red handle. The box wrench is a short shank end type as well, since you can see its end in the photo. Do you have any ideas on the "baby tyre tool" I don't recall it being a Suzuki item and I also don't recall ever seeing it in any Honda tool kits.
Re: Tool kit find.
Posted: Sun Jan 26, 2014 9:17 am
by oldjapanesebikes
Suzsmokeyallan wrote:Do you have any ideas on the "baby tyre tool"
Yamaha I think Allan - 1965 through 1968 roughly ?

Re: Tool kit find.
Posted: Wed Jan 29, 2014 5:16 pm
by old racer
So how many of those tools were actually in the 750 kit,
I'm trying to put a kit together for my L model.
Re: Tool kit find.
Posted: Wed Jan 29, 2014 6:40 pm
by oldjapanesebikes
old racer wrote:So how many of those tools were actually in the 750 kit, I'm trying to put a kit together for my L model.
That kit is for a T500 eh ? For a GT750, just check the Field Guide !
http://www.oldjapanesebikes.com/GT750_f ... e/page-A60" onclick="window.open(this.href);return false;

Re: Tool kit find.
Posted: Thu Jan 30, 2014 4:26 am
by old racer
Sorry Ian,
I must pay more attention when in class,
Or I will never learn anything.
And thanks for the link Idon't know where we would be without your website.