Page 1 of 1
Fork dust seals GT500
Posted: Tue Mar 17, 2009 3:17 am
by bombkawah2
hi,
as I have had requests for dust seals GT500, I had a small series in stock. they are polyurethane elastomere (each pair is tested up to a fork in my workshop). If people are interested, contact me at :
fr.lavallee@free.fr
[img]
[img]http://images.imagehotel.net/9sszjjexlg.jpg[/img][/img]
Posted: Tue Mar 17, 2009 7:04 pm
by rngdng
Nice job, I'm sure you will get some takers.
Lane
me
Posted: Tue Mar 17, 2009 7:27 pm
by gyrocfi
I have a set and they are working nicely. Dofin
Posted: Thu Mar 26, 2009 9:57 pm
by Spondon
I got mine on the bike & they look great. Thanks, Francois!
Posted: Thu Apr 23, 2009 1:40 pm
by bikegeezer
These parts from Francois are the only way to go. NOS may be better if you're entering the bike in a show. But you'd better install those NOS dust seals the night before the show, because they'll deteriorate badly in surprisingly little time. I bought NOS from Suzukidave (the one in the UK). A month later, they looked as bad as the 33 year old originals. A lesson learned about old, discontinued rubber parts.
Stu
Posted: Fri Apr 24, 2009 8:45 am
by Odin
would these work on a T350?
Posted: Fri Apr 24, 2009 10:28 am
by bikegeezer
Odin wrote:would these work on a T350?
No, The GT500 dust seals don't fit any other model. You have to wonder what they were thinking when they decided on the dimensions of those fork sliders.
Stu
Posted: Fri Apr 24, 2009 1:56 pm
by diamondj
bikegeezer wrote:Odin wrote:would these work on a T350?
No, The GT500 dust seals don't fit any other model. You have to wonder what they were thinking when they decided on the dimensions of those fork sliders.
Stu
Actually, they fit them on the '74 GT550. Not sure if they were on the '74 GT750 too but it's possible....
Jim
![[img]http://images.imagehotel.net/9sszjjexlg.jpg[/img]](http://www.imagehotel.net/?from=9sszjjexlg.jpg){kind=link}