Suzuki 2 Strokes

Posted: **Mon Jul 26, 2010 5:39 pm**

hi guys are the buffalo oil pumps rebuildable ,if so are there kits for the seals available?.
thanks mark

Posted: **Mon Jul 26, 2010 11:13 pm**

two-stroke-brit wrote:hi guys are the buffalo oil pumps rebuildable

Not really - TZ375 would be the fellow to talk to- check his web site here. I think about all you can change is the paper gasket on the top.

two-stroke-brit wrote: ,if so are there kits for the seals available?. thanks mark

No kits, but you should be able to match-up the seal - the seal that goes under the oil pump (09285-08002) is still listed from Suzuki

Posted: **Tue Jul 27, 2010 8:30 am**

There is nothing much in the oil pump that needs to be replaced. It's unusual for them to wear out as they are bathed in oil.

Posted: **Tue Jul 27, 2010 9:37 am**

Top gaskets are available from GtReiner in Germany and are a great copy, I think they are a better quality paper too.

buffalo oil pump