Suzuki 2 Strokes

Posted: **Sun Feb 07, 2010 4:47 pm**

To quote a somewhat famous movie; IT'S ALIVE!!!!!! After replacing both exciter coils on the stator, new wiring, new block connectors, and building a new CDI box, Iam extremely happy to report it is running again. I will try some carb. cleaner in the tank to hopefully clear the pilot jets. It at first did not want to run when off the mains on the left cylinder, then seemed to clear somewhat. Oh it sounded great to hear it run, just have to put the CDI circuit in a box and mount it, brave the cold and go riding some. Don't want get myself sick just as I get this going again. Can't wait for warmer weather.

Posted: **Sun Feb 07, 2010 6:02 pm**

Thats great news, so can you post some pics of your handiwork.

Posted: **Sun Feb 07, 2010 6:46 pm**

rbond wrote:To quote a somewhat famous movie; IT'S ALIVE!!!!!!

Good to hear ! Mine is still a few months away from trying to get it running - but of course the snow will be here for a while yet as well

Posted: **Sun Feb 07, 2010 6:48 pm**

Good to know now Ian, i'll have to start making my crank separator cause that time is getting close.

Posted: **Thu Feb 11, 2010 3:07 pm**

OK, i am going to try some photos, the circuit is hanging by a paperclip only for testing. I will mount it in a black box (naturally) and place it where the tool kit would be. Perfect place for ease of access, etc. since I don't have a tool kit...... So far of the four circuits I assembled, two work fine, I have not yet tested the other two. Phil C in England sent me info to change the diodes to another type, but that will have to wait until later this year. I still am having problems editing his drawing so I can post it properly here for everyone.

Posted: **Thu Feb 11, 2010 3:10 pm**

Sorry for the 'large' pictures, this part is new to me.

Posted: **Thu Feb 11, 2010 4:56 pm**

Very nice indeed - I hadn't realised there was so little to the circuit. Looking forward to the components list and schematic !

Posted: **Fri Feb 12, 2010 2:45 am**

Wow, now that is ingenuity at work! I reckon there's a good few people would be interested in details of that!

Great stuff and glad it's running.

Posted: **Fri Feb 12, 2010 12:50 pm**

Craig380 wrote:Wow, now that is ingenuity at work! I reckon there's a good few people would be interested in details of that!

Great stuff and glad it's running.

Yep

Posted: **Sun Feb 14, 2010 7:36 am**

I'm one of the people interested in the details of that.

I bow to your genius

Suzuki 2 Strokes

GT500A runs

GT500A runs

Re: GT500A runs

pics

pics