Page 1 of 1
Throttle Cable Routing 1969 T250
Posted: Mon Dec 30, 2024 5:25 pm
by Scaleracing1
I wonder if anyone can share the correct routing in particular for the throttle cables.
Bought a beautiful 69 T250 but they routed the throttle cable so it got crushed when turning the steering on full lock. So wanting to confirm correct routing. Then get a new ( NOS ) cable if possible
Re: Throttle Cable Routing 1969 T250
Posted: Sat Feb 22, 2025 11:41 am
by jsjays1
Did you ever have any luck with this? When I first got my '69 T-350 I had a ton of trouble with this too and had to search photos online and old articles/brochures for images that gave me some hints for how the throttle cable was meant to be routed.
I'm not sure if what I did is "correct", but I routed the cable down in-front of the meters and under the tank, above the coils. Then the three lines split down behind the engine to the carbs and oil-pump. So far, I haven't had any issues with this routing, but there's barely enough slack to make it work.
Photos linked here:
No. 1 -
https://www.flickr.com/photos/193167426 ... ed-public/
No. 2 -
https://www.flickr.com/photos/193167426 ... ed-public/
No. 3 -
https://www.flickr.com/photos/193167426 ... ed-public/
No. 4 -
https://www.flickr.com/photos/193167426 ... ed-public/
No. 5 -
https://www.flickr.com/photos/193167426 ... ed-public/