GT750J brake cables

General discussion about Street two-stroke Suzuki motorcycles.

Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan

Post Reply
A.Holley
Around the block
Posts: 59
Joined: Wed Jan 27, 2016 2:50 am
Country: Australia
Suzuki 2-Strokes: T500, 1200 Bandit, 125 Stinger, Triumph R3

GT750J brake cables

Post by A.Holley »

As some of you are probably awaits , front brake cables for the 4LS front brake are as rare as rocking horse s..t.
I have found a company locally that can make me a set if I give them the relevant dimensions.
If someone has one of these cables, and is prepared to take 10 mins out of there schedule and measure it up, I would be very grateful.
What I need is
1) overall length of outer cable, and the diameter of ferrule on either end
2) length of inner cable from bottom of ball at top end to start of the adjuster rod at bottom end
3) diameter of ball at top end
4)length and diameter of adjuster rod
5) diameter of wire

Once I can get a set of cables, I can then install brake on front end of my T500

Regards
Andrew Holley
aho58@bigpond.com
Post Reply