Gt 550 expansion chambers

General discussion about Street two-stroke Suzuki motorcycles.

Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan

Post Reply
Hawky416
On the street
Posts: 19
Joined: Sat Apr 18, 2020 4:27 am
Country: Uk
Suzuki 2-Strokes: 74 gt550

Gt 550 expansion chambers

Post by Hawky416 »

Good afternoon
This has been a long project!
So I’m building a cafe racer style gt550 and time has come to sort exhausts for it, I’ve managed to find someone that will actually make a set of expansion chambers for me but he needs sizes of the cone to go from, he said he can take the head off and measure the ports and go from that but it doesn’t usually work first time and you end up having to make 2 or 3 sets to make the correct power!
Has anyone made a set? Or have the dimensions to start?
Any help is greatly appreciated!
User avatar
jabcb
Moto GP
Posts: 4241
Joined: Mon Dec 13, 2010 4:32 pm
Country: USA
Suzuki 2-Strokes: 69 T350 thru 75 GT750
Location: southwestern Pennsylvania

Re: Gt 550 expansion chambers

Post by jabcb »

Higgspeed in the UK makes 3-into-3s & 3-into-1s for the GT550. https://higgspeed.com

My 72 GT550 with Higgspeed 3-into-1s:
ImageSCMR_2022_2319 by jabcb, on Flickr
BAS (Bike Acquisition Syndrome) - too many bikes but have room for more

Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
User avatar
Alan H
Moto GP
Posts: 3172
Joined: Thu Feb 16, 2012 11:50 am
Country: England
Suzuki 2-Strokes: 4 x GT550s - J, M, A, B.
Location: The Republic of South Yorkshire

Re: Gt 550 expansion chambers

Post by Alan H »

Lots of options here - viewtopic.php?f=2&t=14375&p=175556&hilit=Abbey#p175556
Mine is at the bottom of the 1st page , by Mick Abbey, https://en-gb.facebook.com/mickabbeytuning
Think of how stupid the average person is, then realise that half of them are more stupid than that.
Post Reply