Suzuki 2 Strokes

while i've been building this monoshock and reed valve gt250 i've come across alsorts of sprocket sizes while i've been looking for the correct ones for this. anyway, to gear up a gt250 and use a lighter [520] chain, use a 39 tooth sprocket from a ts185, you need the one with 12 bolt holes in it, 6 x 8mm and 6 x 10mm. then get a 15 tooth front sprocket from a suzuki rm465 and ratio is down to 2.6 from 2.93. bit slower on acceleration, but quicker on the top end. in case anybody's interested. yes, they fit perfectly
cheers, dd.

Hi DD

Good info thanks. This mono-reed 250 project must have passed me by. Got any pics?

Cheers
Dax

All is revealed here - https://2strokeforum.com , and Ade (dollydog) is here - https://2strokeforum.com/user/2118/recent_threads where you can trawl through all the stuff he posts.
Please do a nice intro if you visit and decide to join,.
The moderator on there is a bit of a testy old sod at times.....

Alan H wrote: ↑Sun Nov 29, 2020 1:03 pm All is revealed here - https://2strokeforum.com , and Ade (dollydog) is here - https://2strokeforum.com/user/2118/recent_threads where you can trawl through all the stuff he posts.
Please do a nice intro if you visit and decide to join,.
The moderator on there is a bit of a testy old sod at times.....

I wonder how you know that then?

for once i agree with him
trawl being the operative word. at the last look it was 31 pages long - most of that is the engine. did i mention it was also now a monoshock? i love trying different things - and upsetting the purists
cheers, dd.